Pre-mounting table:
Table 3m*1,5m, height same as exit corner cleaner
Operation : sash arrives with the labels coming from the machining centre, the operator scans the sash and all the specifications are represented in figures and per piece on the screen
Mounting of hardware + these to be cut, metal scissors – crémone (espanjolet)
A length stop is positioned automatic for cutting the hardware
Only clips hardware is valid to work with an MT/CNC
There is a rack for hardware storage on top of the pre-mounting table
Equiped with screen, keyboard, pc, bar code reader, manual screw machine on fixed on balance
Table fixation automatic hardware:
To place left or right
The sashe is placed manual on the table
The cycle is started with bi-manual control
The clamping passes automatic
The screw machine fixes all the hardware automatic with data including the pivot OB, with 2 different lengths of screws (one for the hardware, one for the pivot)
When the middle-pivot is pre-drilled in the centre, the fixation passes also automatic
2 sorts of screws and 2 automatic loaders
The cycle necessary to fix the hardware for f.ex. an OB 800mm*1000mm, in less than 1 minute (depends on mark and kind of hardware)
Dimensions minimum : window opening 180mm*180mm, dimensions maximum outside 1400*2400 mm
Output table to evacuate the finished sliding window, 3000mm*1500mm
Possibility to place the finished sliding window automatic on the output table
The automatic cycle is protected by a light barrier